How To Install Ktm Handguards

Don't panic, it'south easy

Full-wrap hand guards are an off-roader's best friend, and since nosotros are all virtually having friends, we are going to show you how to install some on your trusty steed. Basic tools brand the job easy, and with a bit of patience, you lot can get the job washed. Take hold of your hacksaw, a round file and a razor blade, and let's go.

Starting time by trimming off the terminate of your grip. Be very conscientious, slicing yourself with a razor is no good. Simply ask Berth, he sank ane a couple inches deep into his thigh this calendar month working on another bicycle.

Use a hacksaw to trim off the very terminate of your throttle tube. Take your fourth dimension and do it right, there is no need to get crazy, all you lot'll get is bar bandy and a crocked cut.

Slide the throttle tube off, and with a round file clean up the within of your throttle tube. You desire that throttle tube dainty and smooth so y'all tin pin information technology when you need it.

middle content two stroke

We used a set of Moose full wrap handguards. We moved our throttle tube in slightly, so the full wrap guard doesn't rub confronting the grip or the cut throttle tube. Yous don't want any binding; whiskey throttle is a scary thing. Slide the wedges into the stop of the handlebar first.

The Moose handguard mount off the handlebar has a cool dip to information technology so you can run your cable and wires without worry. We lined everything up finger tight and and then tightened the handguard starting at the end of the bar, and then worked everything tight past going dorsum and along. A little grease on the threads is a good thought since the bolts are steel, and threading into aluminum.